Rembam DT01411 Projector Replacement Compatible Lamp with Housing for HITACHI CP-A352WN CP-AW2503 CP-AW3003 CP-AW3019WNM CP-AW312WN CP-AX3003 CP-AX3503 CP-AX3505 CP-BW301N CP-BX301N
Current Category：Presentation Products
- ☀Rembam all items are 100% New(New and Improved Technology).And will be packaged in good condition before dispatch
- ☀Lifetime:Premium quality,high brightness,long Life replacement projector lamp,lamp lifetime approximately 2000 hours
- ☀Install:is easy and quick for your installation to make sure your device is back in action
- ☀Guarantee:Take strict test before delivery.Excellent return service and friendly customer service.Any other problems with the projector lamp,please contact us.
- ☀Compatible projector:for HITACHI CP-A352WN HITACHI CP-AW2503 HITACHI CP-AW3003 HITACHI CP-AW3019WNM HITACHI CP-AW312WN HITACHI CP-AX3003 HITACHI CP-AX3503 HITACHI CP-AX3505 HITACHI CP-BW301N HITACHI CP-BX301N
Rembam has own factory and many experienced workers.Every lamp will be take strict quality test before leaving factory.So you don't need to doubt the quality.
Compatible:for HITACHI CP-A352WN HITACHI CP-AW2503 HITACHI CP-AW3003 HITACHI CP-AW3019WNM HITACHI CP-AW312WN HITACHI CP-AX3003 HITACHI CP-AX3503 HITACHI CP-AX3505 HITACHI CP-BW301N HITACHI CP-BX301N
1 bulb with housing
1 Instructions sheet
1.Turn off the projector and unplug the power cord.
2.Let the projector cool for at least an hour. The lamp is extremely hot immediately after use.
3.Loosen the lamp cover screw. Then slide the lamp cover off.
4.Loosen the two screws holding the lamp in place.
5.Hold the lamp as shown and pull it straight out.
6.Gently insert the new lamp. Then tighten its screws.
7.Replace the lamp cover, then tighten its screw.
1.To avoid burns,allow the projector to cool for at least 60 minutes before replacing the lamp.
2.We provide excellent refund service with no any contidition with 12 hours feedback.If you have any questions,please contact us.We will try our best to sole your problem as soon as possible.